This Nexus 1000 length with locking barbs allows for quick and robust installation of the chimney system. The Nexus twist lock system with locking band allows for 3m of unsupported length from the last support and requires 50mm from combustible material. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
This Nexus 1000 length with locking barbs allows for quick and robust installation of the chimney system. The Nexus twist lock system with locking band allows for 3m of unsupported length from the last support and requires 50mm from combustible material. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
Wall bracket offering adjustment from wall of 100mm - 210mm (Long bracket). Tested and passed to force of 80MPH wind.
Wall bracket offering adjustent from wall of 100mm - 210mm. Tested and passed to wind force of 80MPH.
120mm Length Nexus Twin Wall insulated chimney (G50). Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
120mm length
135 Tee is used at the base of an external vertical Nexus chimney system after exiting through the property wall. Comes with a heavy duty cliped locking band for increased stability. A tee cap will be required and allows for flue inspection and cleaning of soot deposits. Manufactured in UK
A 135 degree tee to be used on the outside of a property when installing Nexus through a wall. Fully welded joint on tee branch.
300MM Length of Nexus Twin Wall insulated chimney system (G50). Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
Must be used when passing through external walls. Adjustment of 200mm - 380mm
Must be used when passing through an external wall. Adjustment of 200mm - 380mm.
45 degree bend for offset requirements. Comes standard with heavy duty locking band to increase stability (G50). Manufactured in UK
45 Degree bend, comes with a heavy duty cliped locking band for improved stability.
To be used with a short bracket
To be used with short wall bracket
500mm Length of Nexus Twin Wall insulated chimney system (G50). Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
Wall bracket (Short) offering adjustment from wall of 50mm - 100mm. Tested and passed to wind force of 80MPH.
Wall bracket (Short) offering adjustment from wall of 50mm - 100mm. Tested and passed to 80MPH wind force.
Used as the entry to a vertical chimney from a horizontal appliance outlet. Comes with a heavy duty screwed locking band for increased stability. Manufactured in UK
Designed to be used at the top of a lowered chimney stack in the loft space allowing to connect Nexus to a Flue liner. The plate will need to be bolted down to the chimney stack with a motar mix placed on top offering a transition adaptor with support. Made in UK
This product is used to transition from a stove collar or vitreous connecting pipe into Nexus twin wall insulated chimney
To connect Svit or a stove to Nexus 125mm - 125mm
To transition from a stove or SVit with a 6" diameter to NEXUS 150mm
The D5 offers a more aesthetically pleasing flat appearance to the standard ventilated plates, whilst still incorporating an intumescent matrix for maximum safety. This component is finished to a high quality gloss white finish to blend in with a ceiling. Made in UK.
The D5 offers a more aesthetically pleasing flat appearance to the standard ventilated plates, whilst still incorporating an intumescent matrix for maximum safety. This component is finished to a high quality gloss white finish to blend in with a ceiling. Made in UK. ** Includes joist support bracket and ventialted plate for floor of first floor
Required for all chimney installations, completed and perminantely posted at the property.
Lead flashing to be used to dress roof structre around Nexus and create a watertight seal.
Lead flashing to dress roof structre around Nexus and make a watertight seal.
Lead flashing to dress roof structre around Nexus and create a watertight seal.
Lead flashing to be used to dress roof around Nexus and create a watertight seal.
This adaptor is to connect Nexus twin wall insulated chimney system at the bottom to Selflex liner at top.
Used to connect Nexus twin wall to flexible chimney liner
To increase from a 5" stove collar or svit to 6" Nexus
A rain cap with mesh incorporated to protect from birds. Made in UK
Rain cap with mesh to protect from birds.
Rain cap with mesh to protect from birds
A locking band must be used on each joint, each component comes with a locking band and included in the price.
Can be used where the Nexus system needs stabalising on the roof
Can be used to stabalise Nexus on the roof.
Can be used to stabalise Nexus on the roof
Designed to allow Nexus twin wall insulated chimney to be supported on roof joists/rafters etc. Supplied with a diameter specific rotational clamp band. Maximum suspended chimney length supported is 9m when supported on a truss or 6m when supported below the truss. Suitible for up to 600mm rafter span. Nexus can be installed with 3m freestanding from the last support as standard. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
To support Nexus chimney system from roof rafters when penetrating a roof
The Round Top offers strong protection against driving rain and wind, recommended for exposed locations. Made in UK.
This Cowl offers strong protection against driving rain and wind.
The round top offers strong protection against driving rain and wind.
Round top cowl offers strong protection against driving rain and wind.
Used to weather the top of the flashing and comes with a tube of sealant. Made in UK.
** Please note the storm collar comes with a sprung clip not a thread as illustrated.
Used to weather the top of the flashing and comes with a tube of sealant.
Can be used to extend the free standingnheight from 2.5m to 3.5m. Must be used on all joints from the last support to achieve this.
Can be used to extend free standing height from 2.5m to 3.5m. Must be used on all joints from the last support to achieve this.
Can be used to extend free standing height from 2.5m to 3.5m. Must be used on each joint after last support to achieve this.
Can be used to extend free standing height from 2.5m to 3.5m. Must be used on each joint after last support to achieve this.
Tear Drop Slate Hearth
Back Corner to front - 1140mm
Radius starts at 450mm from back corner
Cap to be added to bottom of tee, alows for inspection of flue and removing soot deposits when taken off the Tee. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
Two piece adjustable length with a range of 500mm - 850mm. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
Two piece adjustable length with a range of 350mm - 530mm. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
To be used to take vertical load of the chimney when supported from a wall. Adjustment 50mm - 150mm. Requires M10 Wall fixings. Support length included.
Used to take vertical load of the chimney when supported from a wall. Adjustment 50mm-150mm. Requires M10 fixings. Support length included.