1000mm length of connecting pipe with access door for sweeping flue way
1000 x 150mm length of connecting pipe with soot door to enable sweeping of the flue.
Connecting flue pipe to connect the appliance to a flex adaptor or NEXUS appliance adaptor
Used to connect a 100mm ID stove collar to 125mm Svit
500mm Length of vitreous with access for flue draft testing built in
Front Hearth 1219x381x20
Back Hearth 900x450x20
Both cut out of same slab of slate for colour match
.png)
Connection pipe with 45 degree smooth angle, Used to provide a 45 degree change of direction or can be used as pairs to create an offset
.png)
125mm 45 degree elbow connecting flue pipe with access door for sweeping of flue.
150mm 45 degree elbow connecting flue pipe with access door for sweeping flue.
500 x 150 length of connecting pipe with soot door for access to sweep flue.
The Adjustible length constitutes a slip length designed to slide into an existing standard length. A clamp band is then secured around the joint to fix the adjustible length in position.
Adjustment range 50mm - 420mm
Used to supply lateral support to Svit product.
The adjustible length constitutes a slip length designed to slide into an existing standard length. A clamp band is then secured around the joint to fix the Adjustible length in position.
Adjustment range 50mm - 420mm
Galvanized steel plate to close and seal the flue at the top of the fireplace opening
* See drop down option for sizes *
A 500mm length of connecting pipe fitted with a 1/4" removable plug for draught sampling.
Used to provide a 90degree change of direction. Supplied complete with cap.
90 degree tee and cap 150mm