Wall bracket offering adjustment from wall of 100mm - 210mm (Long bracket). Tested and passed to force of 80MPH wind.
A 135 degree tee to be used on the outside of a property when installing Nexus through a wall. Fully welded joint on tee branch.
Must be used when passing through external walls. Adjustment of 200mm - 380mm
To be used with short wall bracket
Wall bracket (Short) offering adjustment from wall of 50mm - 100mm. Tested and passed to wind force of 80MPH.
Designed to be used at the top of a lowered chimney stack in the loft space allowing to connect Nexus to a Flue liner. The plate will need to be bolted down to the chimney stack with a motar mix placed on top offering a transition adaptor with support. Made in UK
Designed to be used at the top of a lowered chimney stack in the loft space allowing to connect Nexus to a Flue liner. The plate will need to be bolted down to the chimney stack with a motar mix placed on top offering a transition adaptor with support. Made in UK
To connect Svit or a stove to Nexus 125mm - 125mm
The D5 offers a more aesthetically pleasing flat appearance to the standard ventilated plates, whilst still incorporating an intumescent matrix for maximum safety. This component is finished to a high quality gloss white finish to blend in with a ceiling. Made in UK.
Required for all chimney installations, completed and perminantely posted at the property.
Lead flashing to be used to dress roof structre around Nexus and create a watertight seal.
Lead flashing to dress roof structre around Nexus and create a watertight seal.
This adaptor is to connect Nexus twin wall insulated chimney system at the bottom to Selflex liner at top.
To increase from a 5" stove collar or svit to 6" Nexus
Rain cap with mesh to protect from birds.
A locking band must be used on each joint, each component comes with a locking band and included in the price.
Can be used to stabalise Nexus on the roof.
Can be used to stabalise Nexus on the roof.
Designed to allow Nexus twin wall insulated chimney to be supported on roof joists/rafters etc. Supplied with a diameter specific rotational clamp band. Maximum suspended chimney length supported is 9m when supported on a truss or 6m when supported below the truss. Suitible for up to 600mm rafter span. Nexus can be installed with 3m freestanding from the last support as standard. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
This Cowl offers strong protection against driving rain and wind.
Used to weather the top of the flashing and comes with a tube of sealant.
Can be used to extend free standing height from 2.5m to 3.5m. Must be used on all joints from the last support to achieve this.
Can be used to extend free standing height from 2.5m to 3.5m. Must be used on all joints from the last support to achieve this.
Tear Drop Slate Hearth
Back Corner to front - 1140mm
Radius starts at 450mm from back corner
To be used to take vertical load of the chimney when supported from a wall. Adjustment 50mm - 150mm. Requires M10 Wall fixings. Support length included.