To be used with a short bracket
Designed to be used at the top of a lowered chimney stack in the loft space allowing to connect Nexus to a Flue liner. The plate will need to be bolted down to the chimney stack with a motar mix placed on top offering a transition adaptor with support. Made in UK
The D5 offers a more aesthetically pleasing flat appearance to the standard ventilated plates, whilst still incorporating an intumescent matrix for maximum safety. This component is finished to a high quality gloss white finish to blend in with a ceiling. Made in UK.
Can be used where the Nexus system needs stabalising on the roof
Designed to allow Nexus twin wall insulated chimney to be supported on roof joists/rafters etc. Supplied with a diameter specific rotational clamp band. Maximum suspended chimney length supported is 9m when supported on a truss or 6m when supported below the truss. Suitible for up to 600mm rafter span. Nexus can be installed with 3m freestanding from the last support as standard. Twist lock system with locking barbs and 50mm band for rapid and robust installation. Manufactured in UK
Can be used to extend the free standingnheight from 2.5m to 3.5m. Must be used on all joints from the last support to achieve this.